The model 642M centrifuge is designed for the Home Health Nurse that is on-the-go. Powered by a vehicle’s 12V electrical supply, the 642M is designed to provide the ideal pre-analytic horizontal-sample-processing recommended by all blood collection tube manufacturers. Using patented technologies, the 642M reduces blood separation times by 33%, leaving more time to travel to the next appointment and less time waiting for completion of the centrifuge cycle. The unmatched performance of the 642M maximizes sample integrity by keeping your patient samples cool during centrifugation and by providing a high quality gel separation layer.
Easy to use: The simple interface runs the preset cycle (10 minutes at 3,400 RPM/1,600 xg) at the touch of a button. Runtime can be adjusted from 1 to 30 minutes.
Designed for mobile centrifugation: With in-vehicle centrifugation, phlebotomists are free to plan a day-long route without returning to the lab. This affordable device can greatly increase range of service and productivity without sacrificing specimen quality or patient outcome.
Built to last: No routine maintenance. The brushless motor and unique convection-based cooling system ensure years of high-quality separations.
Engineered for safety: Ensure maximum safety with the clear, shatterproof lid, which locks until the centrifuge has stopped completely.
A great value: Each unit arrives ready to run with horizontal rotor, universal tube holders.
2-Stage Horizontal Rotor: Our patented swing-out rotor design incorporates a unique test tube holder that produces horizontally separated samples, ideal for transportation.
Features and Benefits
- Powered directly from a vehicle’s 12V electrical supply
- Preset speed and runtime for consistent processing
- Simple two-button controls ensure maximum repeatability
- Designed, built, and supported in the USA.
- Electronic Timer: Preset to 10 minutes for ideal gel separations; selectable from 1 to 30 minutes for general purpose use
- Capacity: Up to six (6) 17 mm x 100 mm tubes
- Tube sizes: 3 mL to 10 mL: up to 17 mm x 100 mm
- 12 Volt DC motor: Years of operation with no routine maintenance
- Quiet operation with low vibration: A double-encased motor assures quiet performance and low out-of-balance vibration
- Cool operation: Unique design of the convection based cooling system protects the samples even under the heaviest workloads
- Footprint: Compact design uses approximately 1 sq. ft. of counter space
- 6 Foot cord: Easily reaches the rear of your vehicle
- Automatic lid lock: Centrifuge will not run with the lid open and the lid cannot be opened while samples are spinning
- Positive lid latching: Firm mechanical latching of the lid prevents the escape of debris
- Clear shatter proof lid: Allows for safe sample observation and optical calibrations
- Reinforced guard bowl: Provides maximum safety and durability
Technical Specifications
- Sound level: 65 dBA
- Dimensions:
- Height: 8.75" (22 cm)
- Width: 11.75" (30 cm)
- Depth: 14.0" (35.5 cm)
- Weight: 12 lbs. (5.4 kg)
- Max. Acceleration Time: 10 Seconds
- Max. Deceleration Time: 20 Seconds
- Timer: Electronic, Programmable from 1 to 30 Minutes; Preset to 10 Minutes
- Voltage: 12 Volts DC
- Max. Power Requirements: 100 Watts
- Protection Breaker: Fused: 15 Amps
- Centrifuge Motor: 1/30 H.P. DC
- Speed: 3,400 RPM max
- Force: 1,600 xg max
- Rotor Radius: 5" (11 cm)
- Capacity: 6 x 75-100 mm (3-10 mL)
Warranty Information
- 1-year warranty
RETURNS :
For complete details of our return policy and process, please refer to our general return policy page. We take the responsibility to make sure your product
arrives in brand new working condition. Should your item arrive damaged, we will replace the product at no cost to you.
CANCELLATIONS: Please note that any specially ordered or custom-made products are non-cancellable once production has begun. Unfortunately, we are unable to
accept returns on such items.
AVAILABILITY NOTE: Availability of products may vary based on the manufacturer’s current stock levels.
