12 Cu. Ft. TempLog Premier Touchscreen Glass Door Laboratory Refrigerator
These touchscreen refrigerators offer precise temperature control and advanced digital monitoring, ideal for clinical and research settings. They feature variable speed compressor technology for exceptional performance and energy efficiency. Experience an intuitive color touchscreen controller, offering multi-layered access and data logging capabilities. Protect your samples with forced draft air circulation and customizable alarms with remote contacts. Also enjoy the benefit of natural, hydrocarbon refrigerants for energy savings and a greener laboratory footprint. This refrigerator is constructed with durable powder-coated steel, a self-closing glass door, a keyed access lock, LED interior lighting, and adjustable interior shelving. Also included is a comprehensive 3-year parts and labor warranty with a generous 7-year compressor warranty to protect your investment. With these refrigerators, you’ll increase performance and maximize efficiency in your lab.
Details:
- Storage capacity 12 Cu. Ft.
- Door One (1) swing glass door, self-closing, right hinged, not reversible, magnetic door gasket
- Shelves Three (3) adjustable shelves (adjustable in ½” increments)
- Drawers Non-applicable
- Mounting and Installation Swivel casters – locking front casters
- Interior lighting LED interior lights are safety shielded and switch controlled
- Airflow Management Forced draft air circulation – Patented air flow technology
- External probe access Probe access port (3/4″) on rear wall
- Insulation Cabinet is foamed-in-place with EPA compliant high density urethane foam
- Exterior materials White powder coated steel
- Access control Keyed door lock; compatible with optional digital lock (including Pyxis, Omnicell, and AcuDose RX)
- General warranty Three (3) year parts and labor warranty
- Compressor warranty Seven (7) year compressor warranty
- Product Weight (lbs) 223, Shipping Weight (lbs) 256
- Exterior Width (in) 25″, Exterior Depth (in) 29″, Exterior Height (in) 66″
- Rated Amperage 2 Amps
- Power Plug/Power Cord NEMA 5-15 plug
- Facility Electrical Requirement 110 – 120V AC, 15A breaker, NEMA 5-15 receptacle
- Agency Listing and Certification ETL, C-ETL listed. Meets or exceeds Energy Star v2.0 for Laboratory Refrigerators. Official listing pending – see energystar.gov
Refrigeration System:
- Compressor Hermetic, Variable speed
- Refrigerant EPA SNAP compliant R600a Isobutane (Hydrocarbon natural refrigerant)
- Condenser Tube and grid, high efficiency fan forced air
- Evaporator Fin and tube, high efficiency fan forced air
- Defrost Cycle defrost
Temp Controller:
- Controller technology Microprocessor temperature controller with variable frequency compressor control, C°/F° switchable, resolution is 0.1° C/0.2° F
- Noise pressure level (dBA) 40 dBA or less installed
- Display technology Digital Temperature Display
- Stability – simulator ballast (°C) +/- 0.3° C
- Average heat rejection (BTU/h) < 250 BTU/h
- Max temp variation – cabinet air (°C) +/- 1.5° C
- Adjustable Temperature Range 2°C to 15°C
- External alarm connection Remote alarm contacts
- Digital Communication Non-applicable
- Battery Backup For controller temperature display and alarms only, no cooling active
- Energy consumption (KWh/day) <0.9 KWh/day *meets Energy Star v2.0 for Laboratory Refrigerators
- Display probe Product simulator bottle with glass bead media
- Pull down time to nominal operating temp < 30 min (empty)
- Alarms Audible and visual high/low temperature alarms, remote alarm contacts, sensor error alarm, power failure alarm, door ajar alarm
- Disclaimer(s): Refrigerator requires a minimum 2” of clearance at back and sides of the unit for proper ventilation
- Performance Note Max temperature variation based on an empty chamber at steady state using 15 bare (unweighted) thermocouple probes. Product loading, door openings, and ambient conditions will affect performance. Stability of simulator ballast based on bottle probe provided with the unit located center of empty chamber at steady state, no door openings
RETURNS :
For complete details of our return policy and process, please refer to our general return policy page. We take the responsibility to make sure your product
arrives in brand new working condition. Should your item arrive damaged, we will replace the product at no cost to you.
CANCELLATIONS: Please note that any specially ordered or custom-made products are non-cancellable once production has begun. Unfortunately, we are unable to
accept returns on such items.
AVAILABILITY NOTE: Availability of products may vary based on the manufacturer’s current stock levels.
